You are not logged in
Login Registration

Cutting and sawing

Diamond cutting wheels for angle grinders

Diamond wheel
HERMAN BD-20 Agressa
For rough cutting of concrete

Cuts concrete quickly and effortlessly. Possibility of choosing a version with 10 mm segment height for longer life
from 14,28 excl. VAT

Diamond wheel
HERMAN BD-30 Extensa
Not only for cutting concrete

A medium rough tool with a wide range of uses. Possibility of choosing a version with 10 mm segment height
from 14,48 excl. VAT

Diamond wheel
HERMAN BD-40 Precisa
Precise cutting of tiles

The ideal disc for precise cutting of tiles and paving with a continuous, uninterrupted cutting edge
from 9,27 excl. VAT

Diamond wheel
HERMAN BD-70 Hybrid
Amphibian for tiles

An unusual "two-in-one" hybrid disc : cutting and grinding with the same tool - now and then
from 32,14 excl. VAT

Diamond wheel
HERMAN BD-50 Impressa
For granite and marble

An impressive cutting disc with a specially shaped pair of alternating segments
from 46,57 excl. VAT

Diamond wheel
HERMAN BD-60 Abrasiva
For masonry and bricks

For cutting abrasive materials. Segments connected to the tool body by laser welding technology
from 21,54 excl. VAT

Abrasive cutting wheels for angle grinders

Cutting wheel
HERMAN AS-40 Abrasor
For steel | Depressed centre

Cold, fast and precise cutting of thin-walled, especially profiled steel materials without burrs
from 0,84 excl. VAT

Cutting wheel
HERMAN AS-30 Classic
For steel | Flat

The optimal formula of the corundum and binder mixture for a very good ratio between service life and cutting speed
from 0,71 excl. VAT

Cutting wheel
HERMAN AR-40 Abrasor
For stainless steel | Depressed centre

Very high hardness of the "V" binder, precise and clean cutting of thin-walled stainless steel materials without burrs
from 0,88 excl. VAT

Cutting wheel
HERMAN AR-30 Classic
For stainless steel | Flat

Very high hardness of "V" binder and original formula for a good ratio between service life and cutting speed
from 0,76 excl. VAT
HERMAN DISPLAY|10 kovových boxov 125x1,0x22,2 97140201

Cutting wheel
AS-30 Classic Set of wheels
In a metal box | Display

Set of 10 x 10 cutting discs in an elegant metal box, with moisture reducer and hook for hanging
84,14 excl. VAT

Cutting wheel
AS-30 Classic Set of wheels
In a metal box

Set of 10 cutting discs in an elegant metal box, with moisture reducer and hook for hanging
from 8,02 excl. VAT

Abrasive cutting wheels for Metall cut-off saw

Cutting wheel
HERMAN AS-31 Classic
For steel

Optimum corundum/binder blend formulation for a very good ratio between durability and cutting speed
from 5,90 excl. VAT

Carbide discs for circular saws

Circular saw blade
HERMAN CW-20 Force
Wood from 10 mm

Energy-saving 16-tooth blade developed for fast cutting of soft wood, especially with cordless tools
from 12,22 excl. VAT

Circular saw blade
HERMAN CW-40 Cool
Wood from 6 mm

Cutting disc with 40 thin teeth for smooth longitudinal and transverse cutting of both softwood and hardwood
from 16,91 excl. VAT

Circular saw blade
HERMAN CW-50 Lamina
Laminate flooring from 6 mm

Cutting disc with 40 thin teeth for smooth longitudinal and transverse cutting of laminate flooring
from 22,48 excl. VAT

Circular saw blade
HERMAN CX-20 SteelCut
Steel 1 - 3 mm

Cutting disc with 48 teeth for direct cutting of thin-walled materials from ferrous metals
from 41,77 excl. VAT

Circular saw blade
HERMAN CX-30 AlCuCut
Non-ferrous metals 1 - 3 mm

Cutting disc with 48 teeth for direct cutting of thin-walled materials from non-ferrous metals
from 31,05 excl. VAT

Reciprocating saw blades

Reciprocating saw blade
HERMAN RW-10 Demony
Cutting wood 15 - 190 mm

Aggressive saw blade with a very fast cut in soft wood. Also suitable for cutting live wood
from 3,69 excl. VAT

Reciprocating saw blade
HERMAN RW-20 Hooligan
Rough cutting of wood 20 - 100 mm

Short, with rough teeth and with a tip for straight cutting, arc cutting and also for plunge cutting
from 2,27 excl. VAT

Reciprocating saw blade
HERMAN RW-21 Hooligan
Rough cutting of wood 20 - 175 mm

Blunt-nose, structurally very stable saw blade with rough teeth especially for straight cutting
from 2,84 excl. VAT

Reciprocating saw blade
HERMAN RW-22 Hooligan
Rough cutting of wood 20 - 250 mm

Long version of the rough saw blade for direct cutting up to 250 mm thick
from 3,59 excl. VAT

Reciprocating saw blade
HERMAN RW-30 Accepta
Rough cutting of wood 6 - 100 mm

Short, moderately rough teeth. With tip for straight cutting, arc cutting and plunge cutting
from 2,90 excl. VAT

Reciprocating saw blade
HERMAN RW-31 Accepta
Rough cutting of wood 6 - 175 mm

Saw blade with medium rough teeth especially for direct cutting of wood without nails
from 2,84 excl. VAT

Reciprocating saw blade
HERMAN RW-32 Accepta
Rough wood cutting 6 - 250 mm

Long version of the saw blade with medium rough teeth for direct cutting of wood up to 250 mm thick
from 3,59 excl. VAT

Reciprocating saw blade
HERMAN RW-40 Cool
Clean cut in wood 6 - 100mm

Three-sided diamond precisely ground teeth for a clean cut. Also suitable for plunge cutting
from 5,42 excl. VAT

Reciprocating saw blade
HERMAN RX-20 Extensa
Wood with nails 6 - 100 mm

With a short, very flexible blade for straight cutting, arc cutting and plunge cutting
from 4,18 excl. VAT

Reciprocating saw blade
HERMAN RX-21 Extensa
Wood with nails 6 - 175 mm

Very flexible blade with a long service life, suitable for straight cutting as well as for cutting arcs
from 5,84 excl. VAT

Reciprocating saw blade
HERMAN RX-22 Extensa
Wood with nails 6 - 250 mm

Long version of a very flexible saw blade, especially suitable for direct cutting up to a thickness of 250 mm
from 7,34 excl. VAT

Reciprocating saw blade
HERMAN RX-30 Demolator
Steel profiles : 4 - 12 mm

For demolition work : massive, very strong and short body with beak-shaped tip and 2x2 teeth
from 5,95 excl. VAT

Reciprocating saw blade
HERMAN RX-31 Demolator
Steel profiles : 4 - 12 mm

For demolition work : massive, very strong and rigid body without tip with 2x2 teeth for fast cutting
from 7,17 excl. VAT

Reciprocating saw blade
HERMAN RX-40 SteelCut
Sheets and profiles 3 - 10 mm

flexible, break-resistant tool. Thanks to the 2x2 teeth, very fast cutting of steel, stainless steel and non-ferrous metals
from 4,36 excl. VAT

Reciprocating saw blade
HERMAN RX-50 SteelCut
Sheets and profiles 2 - 8 mm

Flexible, break-resistant flexible tool with fast cutting of steel, stainless steel and non-ferrous metals
from 3,31 excl. VAT

Reciprocating saw blade
HERMAN RX-60 SteelCut
Sheets and profiles 1.5 - 4 mm

Flexible, break-resistant flexible saw blade with relatively fast cutting of steel, stainless steel and non-ferrous metals
from 3,31 excl. VAT

Reciprocating saw blade
HERMAN RX-70 SteelCut
Thin sheets 0,7 - 3 mm

A flexible, break-resistant flexible tool with very fine tooth spacing for cutting thin materials
from 3,31 excl. VAT

Reciprocating saw blade
HERMAN RY-10 Cast Iron
Cast iron profiles : 1 - 10 mm

An unusual saw blade with a carbide grain layer for very hard cast iron profiles up to 180 mm in diameter
from 9,55 excl. VAT

Reciprocating saw blade
HERMAN RY-20 Gypsi
Plasterboard up to 100 mm

Gradually inclined body and teeth fitted with hard metal plates, an ideal helper when installing plasterboard
from 18,02 excl. VAT

Reciprocating saw blade
HERMAN RY-30 Carbide
Soft building materials

Teeth fitted with carbide plates and a beak for cutting abrasive materials on construction sites
from 19,15 excl. VAT

Reciprocating saw blade
HERMAN RY-50 Isola
Insulation materials up to 350 mm

Wide and long saw blade especially for cutting building insulation materials up to a thickness of 350 mm
from 15,70 excl. VAT

Reciprocating saw blade
HERMAN RY-31 Carbide
Soft building materials

Saw blade with a massive blade equipped with 12 cutting teeth made of sintered carbide
from 43,43 excl. VAT

Reciprocating saw blade
HERMAN RY-60 IceCut
Ice, bones and frozen foods up to 250 mm

For special use - made of stainless steel, flexible, with rough aggressive teeth
from 10,30 excl. VAT
Sada pílových listov HERMAN QR 10 Wood Pre rezanie dreva 97140401

Reciprocating saw blades set
HERMAN QR-10 Wood
For cutting wood

Complete set of 11 different tail saw blades for cutting wood and nailed wood
41,90 excl. VAT
Sada pílových listov HERMAN QR 20 Steel Pre rezanie ocele aj nerezu 97140402

Reciprocating saw blades set
HERMAN QR-20 Steel
For cutting steel and stainless steel

set of 11 different saw blades for cutting steel and stainless steel profiles of various thicknesses
50,09 excl. VAT

Jigsaw blades

Jigsaw blade
HERMAN JW-10 Demony
Softwood : 5 - 50 mm

Aggressive saw blade for cutting curves. Very fast cutting in soft wood
from 1,14 excl. VAT

Jigsaw blade
HERMAN JW-13 Demony
Softwood : 5 - 120 mm

Aggressive saw blades for straight cutting. Very fast cut in soft wood. Available in 4 lengths
from 1,04 excl. VAT

Jigsaw blade
HERMAN JW-18 Demony
Hardwood : 5 - 50 mm

Bimetallic, long life for cutting hardwood and very fast cutting of softwood
from 2,48 excl. VAT

Jigsaw blade
HERMAN JW-20 Hooligan
Softwood : 4 - 50 mm

Saw blade for cutting curves. Fast, rough cut in soft wood
from 1,23 excl. VAT

Jigsaw blade
HERMAN JW-23 Hooligan
Softwood : 4 - 50 mm

Saw blade for straight cutting. Fast, rough cut in soft wood
from 0,89 excl. VAT

Jigsaw blade
HERMAN JW-24 Hooligan
Softwood : 6 - 80 mm

Saw blade in extended version for straight cutting. Rough, fast cut in soft wood
from 1,27 excl. VAT

Jigsaw blade
HERMAN JW-30 Fine
Softwood : 3 - 15 mm

Short and narrow saw blade for cutting fine curves in soft wood from 3 mm thick
from 0,89 excl. VAT

Jigsaw blade
HERMAN JW-33 Fine
Softwood : 3 - 80 mm

Saw blades for fine, straight cutting in soft wood from 3 mm thick. Available in 2 lengths
from 0,86 excl. VAT

Jigsaw blade
HERMAN JW-40 Cool
Laminate and wood : 2 - 20 mm

Short, narrow, clean-cut curves in laminate and softwoods from 2 mm thick
from 1,44 excl. VAT

Jigsaw blade
HERMAN JW-41 Cool
Softwood : 4 - 30 mm

Double-sided toothed, slender, with clean-cut curves in softwood from 4 mm thick
from 1,77 excl. VAT

Jigsaw blade
HERMAN JW-42 Cool
Softwood : 3 - 80 mm

Slender, clean-cut curves in softwood and laminate from 3 mm thick
from 1,81 excl. VAT

Jigsaw blade
HERMAN JW-43 Cool
Softwood : 3 - 30 mm

For straight and clean cutting of softwood, plywood, chipboard, etc.
from 1,27 excl. VAT

Jigsaw blade
HERMAN JW-44 Cool
Wood and laminate : 3 - 65 mm

Diamond-cut teeth on three sides. For straight, fast and very clean cuts in soft wood
from 2,09 excl. VAT

Jigsaw blade
HERMAN JW-45 Cool
Softwood : 3 - 80 mm

For straight and clean cutting of softwood, kitchen worktops, chipboard, etc.
from 1,81 excl. VAT

Jigsaw blade
HERMAN JW-48 Cool
Hardwood and laminate : 3 - 45 mm

Bimetallic, long life for clean cutting of hard and soft wood
from 2,86 excl. VAT

Jigsaw blade
HERMAN JX-28 Extensa
Wood with nails : 3 - 80 mm

Bimetallic, universal, for direct cutting of wood with nails, hardwood, aluminium, steel, etc.
from 2,96 excl. VAT

Jigsaw blade
HERMAN JX-50 SteelCut
Sheets : 2,5 - 6 mm

Flexible, fracture-resistant, for cutting stainless steel and steel plates
from 1,64 excl. VAT

Jigsaw blade
HERMAN JX-60 SteelCut
Sheets and profiles : 1 - 3 mm

Flexible, fracture-resistant, for cutting stainless steel, steel, non-ferrous metals, etc. Available in 2 lengths
from 1,64 excl. VAT

Jigsaw blade
HERMAN JX-70 SteelCut
Very thin sheets : 0,5 - 1,5 mm

Flexible, fracture-resistant, for cutting very thin sheets of stainless steel and steel
from 1,64 excl. VAT

Jigsaw blade
HERMAN JY-11 Plexi
Plexiglas, PVC, plastics : 3 - 30 mm

Double-sided toothed, slender, with very clean cutting curves in materials from 3 mm
from 2,60 excl. VAT

Jigsaw blade
HERMAN JY-13 Plexi
Plexiglas, PVC, plastics : 1,5 - 15 mm

Very clean straight cut in thin-walled materials from 1.5 mm thickness in plexiglass, PVC, plastics, etc.
from 1,29 excl. VAT

Jigsaw blade
HERMAN JY-14 Plexi
Plexiglas, PVC, plastics : 3 - 30 mm

Very clean straight cut in materials from 3 mm thick in plexiglass, PVC, plastics etc.
from 1,46 excl. VAT

Jigsaw blade
HERMAN JY-18 Plexi
Plexiglas, PVC, plastics : 1,5 - 15 mm

Long service life, very clean straight cut in thin-walled materials from 1.5 mm thick
from 1,65 excl. VAT
Set of saw blades HERMAN QJ 10 Wood For jig saws 97140501

Set of saw blades
HERMAN QJ-10 Wood
For jig saws

Complete set of 24 different saw blades for jig saw for cutting wood and wood with nails
37,81 excl. VAT
Set of saw blades HERMAN QJ 20 Steel For jig saws 97140502

Set of saw blades
HERMAN QJ-20 Steel
For jig saws

Mix of 4 different saw blades for jig saw for cutting steel, non-ferrous metals
6,14 excl. VAT
Set of saw blades HERMAN QJ 30 Plexi+Laminate For jig saws 97140503

Set of saw blades
HERMAN QJ-30 Plexi+Laminate
For jig saws

Mix of 4 different saw blades for jig saw for cutting plastics and laminates
6,14 excl. VAT
Set of saw blades HERMAN QJ 40 For jig saws 97140504

Set of saw blades
HERMAN QJ-40
For jig saws

Mix of 6 different saw blades for jig saw for cutting sheets, wood and wood with nails
11,15 excl. VAT
Select your country
Select the country where you want your order to be delivered.