Circular saw blade
HERMAN CW-40 Cool
Wood from 6mm

Tool fitted with 40 TCT (Tungsten Carbide Type) teeth, cobalt admixture min. 8%:
good service life when cutting clean wood without nails and staples

Tooth thickness of only 1.6mm, with ATB (Alternate Top Bevel):
good penetration into the cut material and a clean cut thanks to the high number of teeth

The thickness of the body of the disc is only 1mm:
the carbide teeth overhang the edge of the body by approx. 0.3mm and thus minimizes the possibility of the body rubbing against the cut material during straight cuts

Body of the disc made of carbon alloy steel with a surface layer modified by electrophoresis:
the smooth surface contributes to reducing friction even when the tool is deflected to the side during cutting.

Positive tooth face angle 15˚:
optimal angle for cutting soft wood

Dynamic imbalance max. 0.5 grams:
vibration of the tool during cutting is practically excluded

The minimum thickness of the cut material is 6mm:
when cutting thinner wooden materials, the wood fibers are pulled out on the upper side of the cut

Protection of teeth from damage:
the edges of the teeth are protected from damage with a silicone ring in the package