Jigsaw blade
HERMAN JW-17 Demony
Soft wood 5-120mm

Made of HCS carbon steel with a high chromium and vanadium content (58CrV):
ideal raw material for saw blades designed for cutting clean wood composites without residues of clamps and nails

Aggressive, fast cut - large tooth spacing of 4.2mm (6TPI) in combination with CS cutting geometry:
diagonally sharpened, spaced teeth (CS = Crossground & Side set)

Available in three lengths:
choosing the right length depends on the profile and size of the workpiece

The minimum thickness of the cut material is 5mm:
when cutting thin-walled wooden materials, wood fibers are pulled out and the cut is not nice

Blade thickness up to 1.7mm and a constant saw blade width of 8mm along the entire length:
the reinforced body of the saw blade has excellent stability during cutting, holds a 90˚ perpendicular cut line without vibration and does not deviate from the cut

Recommendation:
use professional jig saws with higher performance when working with this saw blade