Tool fitted with 16 TCT (Tungsten Carbide Type) teeth, cobalt admixture min. 8%:
good service life when cutting clean wood without nails and staples
Tooth geometry ATB (Alternate Top Bevel) - teeth with an alternating top bevel:
good penetration into the cut material thanks to the optimal angle of the bevel, face and back, and an aggressive cut thanks to the low number of teeth
The thickness of the body of the disc is only 1 mm:
the carbide teeth overhang the edge of the body by approx. 0.3 mm and thus minimizes the possibility of the body rubbing against the cut material during straight cuts
Body of the disc made of carbon alloy steel with a surface layer modified by electrophoresis:
the smooth surface contributes to reducing friction even when the tool is deflected to the side during cutting.
Positive tooth face angle 15˚:
optimal angle for cutting soft wood
Dynamic imbalance max. 0.5 grams:
vibration of the tool during cutting is practically excluded
Low energy consumption during cutting:
higher number of cuts per battery charge
Minimum thickness of cut material 10 mm:
when cutting thin-walled wooden materials, wood fibers are pulled out on the upper side of the cut
Protection of teeth from damage:
the edges of the teeth are protected from damage with a silicone ring in the package
Martin Dostál –
Dobrý produkt
Miriam Gočová –
spokojnost zakaznikov
Vít Walter –
Kvalitní pilový kotouč
Lucie Šustrová –
dobrá kvalita
Jakub Trešl –
Dobrý kotouč na stavbu, řezání prken.