In 2026

The arrangement of the lamellae allows pressure-controlled, flexible adaptation to the workpiece surface during grinding

The arrangement of the lamellae allows pressure-controlled, flexible adaptation to the workpiece surface during grinding

The arrangement of the lamellae allows pressure-controlled, flexible adaptation to the workpiece surface during grinding

The arrangement of the lamellae allows pressure-controlled, flexible adaptation to the workpiece surface during grinding

Without backing pad. The lamellae are anchored with a special synthetic resin in a reinforced core

Without backing pad. The lamellae are anchored with a special synthetic resin in a reinforced core

Ideal for grinding grooves. The shape of the lamellae ensures even contact with the workpiece on both sides

Ideal for grinding grooves. The shape of the lamellae ensures even contact with the workpiece on both sides

Large-area crescent-shaped lamellae for aggressive material removal from the workpiece when grinding

Large-area crescent-shaped lamellae for aggressive material removal from the workpiece when grinding

Construction on a pad. The main emphasis is placed on the quality of the first layer - the second is only supportive

Construction on a pad. The main emphasis is placed on the quality of the first layer - the second is only supportive

It takes effect immediately when drilling. It excels especially on curved surfaces.

It takes effect immediately when drilling. It excels especially on curved surfaces. 5% Cobalt

The stepped tip shape pulls the drill into the material. For fast drilling of workpieces with a flat surface

The stepped tip shape pulls the drill into the material. For fast drilling of workpieces with a flat surface. 5% Cobalt

When drilling into metal, we often get by with a shorter length of drill bit and spiral. Ground tip Split point 135°

When drilling into metal, we often get by with a shorter length of drill bit and spiral. Cobalt 5% and ground tip Split point 135°

Ideal solution for drilling large diameters into flat surfaces of metal workpieces with a depth of max. 38mm