Drilling and chiselling

Robust and durable three-bit SDS-plus drill for concrete and masonry with all-carbide head and centering tip

Set of HERMAN DC-21 Triton drill bits for building materials with SDS-plus shank : Ø 5, 6, 8, 10mm

Quick SDS-plus drill for concrete and masonry with double-edged carbide insert and centering tip

Set of HERMAN DC-20 Turbo drill bits for building materials with SDS-plus shank : Ø 5, 6, 8, 10mm

Set of HERMAN DC-20 Turbo drill bits for building materials with SDS-plus shank : Ø 5, 6, 8, 10mm

Allows for more comfortable drilling into ceilings, overhead and hard-to-reach places. 2 variants

Minimizes the escape of dust particles from the drilled material, especially when drilling into ceilings and overhead.

Concrete and masonry SDS-max drill with double-edged carbide insert, two side bits and centering tip

Drill bits with carbide insert for drilling in masonry, brick and lower strength building materials

Set of HERMAN DC-50 Classic cylindrical drill bits for masonry and brick : Ø 4, 5, 6, 8, 10mm

W-shaped carbide tip for precise drilling and subsequent easier drilling into a wide range of materials, especially building materials

Set of universal drill bits with W-shaped carbide tip for precise drilling and subsequent easier drilling : 4, 5, 6, 8, 10mm

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Comfortable working thanks to the combination of a 75mm wide blade and ergonomically inclined working part

Ergonomically inclined working part for cutting 22mm wide gutters in concrete and masonry

Larger blade width allows larger areas of substrate material to be removed

Ergonomically inclined working part with two side protrusions for precise cutting of 22mm wide gutters

For cutting 22mm wide gutters into concrete, brick and masonry, with the option of selecting the throug depth

Toothed chisel especially for removing intact bricks and blocks during smaller renovation work

Flat chisel for rough machining of soft and medium-hard wood in particular

Set of concrete and masonry chisels MH-21 with SDS-plus shank : pointed, flat, spade

Set of flat chisels for roughing the surface of soft wood and for cutting out. Chisel widths 10, 14, 20, 26, 30mm.

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Special shape and design of the working part for significantly higher durability and resistance to concrete clamping

Comfortable working thanks to the combination of up to 75mm wide blade and ergonomically inclined working part

Ergonomically inclined working part for cutting 32mm wide gutters in concrete and masonry

Ergonomically inclined working part with two side protrusions for precise cutting of 32mm wide gutters into masonry

For cutting 35mm wide gutters into brick, masonry and concrete, with the option of choosing the through depth.

Toothed chisel especially for removing intact bricks and blocks during renovation work

Special shape of the working part for cleaning cracks and cutting out mortar between bricks, blocks, etc.

Set of concrete and masonry chisels MH-31 with SDS-max shank : pointed, flat, spade

For chopping with maximum use of the impact energy concentrated in one point

For precision work with maximum use of impact energy concentrated in a 32mm blade width

Larger blade width allows removal of substrate material from larger areas

For chopping with maximum use of the impact energy concentrated in one point

32mm blade width allows maximum use of impact energy

Larger blade width allows removal of substrate material from larger areas

Made of 4241, rolled, tip angle 118º with standard taper

Set of HERMAN DM-10 HSS-R metal drill bits : Ø 2, 3, 4, 5, 6, 8mm

Set of HERMAN DM-10 HSS-R metal drill bits : Ø 1,0 - 10,0mm by 0,5mm

Set of HERMAN DM-10 HSS-R metal drill bits : Ø 1.0 - 13.0mm by 0.5mm

Set of HERMAN DM-10 HSS-R metal drill bits : 10x Ø1,0 - 6,0mm by 0,5mm; 10x Ø3,3mm; 10x Ø4,2mm

Set of HERMAN DM-10 HSS-R metal drill bits : 10x Ø1.0 - 6.0mm by 0.5mm; 10x Ø3.3mm; 10x Ø4.2mm

Set of HERMAN DM-10 HSS-R metal drill bits : 10x Ø1,0 - 8,0mm by 0,5mm; 5x Ø8,5 - 13,0mm by 0,5mm; 10x Ø3,3mm; 10x Ø4,2mm

Made of 4241, rolled, tip angle 118º with standard taper

Polished surface with "split point" tip grinding for fast drilling with very good tool life

Set of HERMAN DM-20 HSS-G metal drill bits with ground and polished surface : Ø 2, 3, 4, 5, 6, 8mm

Set of HERMAN DM-20 HSS-G metal drill bits with ground and polished surface : Ø 1,0 - 10,0mm by 0,5mm

Set of HERMAN DM-20 HSS-G metal drill bits with ground and polished surface : Ø 1,0 - 13,0mm by 0,5mm

Set of HERMAN DM-20 HSS-G metal drill bits : 10x Ø1,0 - 6,0mm by 0,5mm; 10x Ø3,3mm; 10x Ø4,2mm

Set of HERMAN DM-20 HSS-G metal drill bits : 10x Ø1.0 - 6.0mm by 0.5mm; 10x Ø3.3mm; 10x Ø4.2mm

Set of HERMAN DM-20 HSS-G metal drill bits : 10x Ø1,0 - 8,0mm by 0,5mm; 5x Ø8,5 - 13,0mm by 0,5mm; 10x Ø3,3mm; 10x Ø4,2mm

High-performance right-cutting drill bits with 5% cobalt additive and "split point" tip grinding

Set of HERMAN DM-40 HSS-E Co 5% metal drill bits with ground and polished surface : Ø 2, 3, 4, 5, 6, 8mm

Set of HERMAN DM-40 HSS-E Co 5% metal drill bits with cut and polished surface : Ø 1,0 - 10,0mm by 0,5mm

Set of HERMAN DM-40 HSS-E Co 5% metal drill bits with cut and polished surface : Ø 1,0 - 13,0mm by 0,5mm

Drill bit with polished surface and titanium nitride coating, also suitable for impact wrenches

HERMAN DM-30 HSS-G TiN drill bit set with polished surface and titanium nitride coating : 3, 4, 5, 6, 8mm

Drill bit with polished surface and titanium nitride coating, for drilling and milling

Smooth drilling of holes of several diameters with one drill in thin-walled materials

Set of HERMAN DM-60 HSS stepped drill bits : Ø 4-12, 4-20, 4-30 mm

Precise deepening and cleaning of holes in steel, non-ferrous metals, cast iron, etc.

Set of HERMAN DM-70 HSS countersinks : Ø 6,3; 8,3; 10,4; 12,4; 16,5; 20,5mm

Wood spiral drill bits with cylindrical shank and polished surface for common use

Set of HERMAN DW-10 Classic spiral wood drill bits : Ø 4, 5, 6, 8, 10mm

Made of HSS M2 high speed steel with ground surface. Long service life and precise drilling in soft and hard wood.

Set of HERMAN DW-11 HSS M2 hardwood spiral drill bits : Ø 4, 5, 6, 8, 10mm

Set of HERMAN DW-11 HSS M2 hardwood spiral drill bits : Ø 3, 4, 5, 6, 8, 10, 12mm

Massive drill with sharp pre-cutting tip and powerful milled spiral for drilling deep holes

Set of HERMAN DW-20 Lewis deep hole wood drill bits : Ø 10, 12, 14, 16, 18, 20x150/235mm

Milling flat drill bit for drilling blind and through holes in hard and soft wood

Set of HERMAN DW-30 wood milling flat drill bits for drilling blind and through holes : Ø10, 13, 16, 19, 22, 25mm

Set of very strong forged drill bits with reinforced shank for drilling in wood : Ø 6, 8, 10, 12, 13, 14, 16, 18, 20, 22, 25, 28, 32, 36, 38mm

Four-point drill bit for glass and ceramics with specially ground carbide plates

Set of HERMAN DC-61 Glass four-point drill bits for glass and ceramics with specially ground carbide inserts : Ø 3, 4, 5, 6, 8mm

Metal pen 145 mm long with tungsten carbide tip for marking hard and very hard surfaces

Universal metal template for identifying and checking the top angles of drills and countersinks in particular

With mixing effect : from bottom to top. For all types thick building mixtures

With mixing effect : from top to bottom. For all types of thin construction mixtures

With mechanical clamping : allows extended reach for bits and drills with 1/4" (SW 6.3mm) shank, 2 variants

With QuickSystem™ function : allows extended reach for bits and drills with 1/4" (SW 6.3mm) shank, 2 variants

Allows the use of conventional screwdriving bits with SDS-plus drilling hammers

Allows connection of chuck for SDS-plus drilling hammers

Allows for more comfortable drilling into ceilings, overhead and hard-to-reach places. 2 variants

Minimizes the escape of dust particles from the drilled material, especially when drilling into ceilings and overhead.