International
Planning to buy more? Request a quote
You will get the shipping for free!
Metal drill bit DIN 340
Suitable equipment
Other electrical tools
Other electrical tools
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Electric drill HERMAN MBX-650 650 W | with hammer function | 82,00 € |
|
82,00 € |
Cordless drill/drivers
Cordless drill/drivers
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Cordless drill/driver HERMAN AXS-1080 | 10,8 V Complete | 144,00 € |
|
144,00 € | |
|
Cordless drill/driver HERMAN AXSP-1440 14,4 V | with impact | Complete | 274,00 € |
|
274,00 € | |
|
Cordless drill/driver HERMAN AXSP-1800 18,0 V | with impact | Complete | 279,00 € |
|
279,00 € | |
|
Cordless drill/driver HERMAN AXSP-1801 18,0 V | 5Ah | Complete | 329,00 € |
|
329,00 € | |
|
Cordless drill/driver HERMAN AXSP-1801 18,0 V | with impact | Baretool | 149,00 € |
|
149,00 € | |
|
Cordless drill/driver HERMAN AXS-1802 18,0 V | with impact | Complete | 194,00 € |
|
194,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V 2Ah | Complete | 290,00 € |
|
290,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V 5Ah | Complete | 363,00 € |
|
363,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V with impact | Baretool | 186,00 € |
|
186,00 € |
Lubricants and oils
Lubricants and oils
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Cutting and drilling oilj HERMAN MT-10 50ml | 2,92 € |
|
2,92 € | |
|
Cutting and drilling oilj HERMAN MT-10 200ml | 4,96 € |
|
4,96 € |
Designation
- For drilling in metal of non-alloyed and alloy steel and steel-alloy up to a strength of 800 N/mm2, grey cast iron, non-ferrous metals, bronze, etc.
- Suitable for conventional electric drills, bench drills and cordless screwdrivers with chuck
Description
Right-hand drill bits with cylindrical shank made of HSS 4241 high-speed steel, with reinforced core:
high resistance to drill bit breakage during drilling
Point angle 118° with standard taper grind:
sufficient for common applications, little resistance to sliding is felt when drilling
Necessary countersinking before drilling:
the tip is not cross-cut (split point)
Sharp drill bit chamfers:
also well deflect long chips, especially when drilling softer materials
Black nitride finish:
reduces friction during drilling and allows sharpening of the tip and the entire spiral
Recommendation:
use cutting oil when drilling for increased lifetime
| Ø1 (mm) | L1 (mm) | L2 (mm) | Ø2 (mm) | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
ID: 16050801
|
2,0 | 56 | 85 | 2,0 | 0,85 € |
|
0,85 € | |
|
ID: 16050802
|
2,5 | 62 | 95 | 2,5 | 0,92 € |
|
0,92 € | |
|
ID: 16050803
|
3,0 | 66 | 100 | 3,0 | 1,06 € |
|
1,06 € | |
|
ID: 16050804
|
3,5 | 73 | 112 | 3,5 | 1,12 € |
|
1,12 € | |
|
ID: 16050805
|
4,0 | 78 | 119 | 4,0 | 1,28 € |
|
1,28 € | |
|
ID: 16050806
|
4,5 | 82 | 126 | 4,5 | 1,34 € |
|
1,34 € | |
|
ID: 16050807
|
5,0 | 87 | 132 | 5,0 | 1,46 € |
|
1,46 € | |
|
ID: 16050808
|
6,0 | 91 | 139 | 6,0 | 1,70 € |
|
1,70 € | |
|
ID: 16050809
|
8,0 | 109 | 165 | 8,0 | 2,63 € |
|
2,63 € | |
|
ID: 16050810
|
10,0 | 121 | 184 | 10,0 | 3,87 € |
|
3,87 € | |
|
ID: 16050811
|
12,0 | 134 | 205 | 12,0 | 5,83 € |
|
5,83 € |
Questions and answers
Karol Bryndzák
technický konzultant
Marek Baláž
manažér úseku opráv
Margita –
Niekedy veľmi užitočný, keď klasický vrták je krátky.
Sometimes very useful when the classic drill is short.
Translate text Show original