Quick Change Cleaning Disc
MKY-20/QC Dragon Green
Abrasive: STRIP-IT + Al₂O₃

Primary raw material STRIP-IT Green:
a three-dimensional mesh structure made of durable nylon fibers, impregnated with a synthetic resin containing a mixture of corundum (Al₂O₃) abrasive grains

HERMAN MP-90S series backing plate must be used according to the selected diameter:
45mm backing plate for a 50mm cleaning disc / 70mm backing plate for a 75mm cleaning disc

Stability of the structure of the primary raw material:
the structure of the tool does not change under the influence of grinding, thus allowing repeated use with undiminished performance

Elasticity as a key feature:
enables cleaning even highly uneven surfaces

The contact surface is only minimally contaminated with dirt:
the grinding dust from the pores is easily released during grinding due to centrifugal force

The porous structure dissipates heat effectively:
ambient swirling air easily penetrates the pores and contributes significantly to cooling the tool

Robust design:
grinding wheel thickness up to 13mm

Aggressive cleaning and removal:
coarse-grained aluminum oxide intensively removes dirt and penetrates the surface of the material

Universal use:
the range depends largely on the peripheral speed (recommended range: 20-30m/s) and the grinding pressure

Warning:
when machining stainless steel, do not use the same tool for other materials

Warning:
when working, do not exceed the maximum speed indicated on the product.