InternationalThere are no items in your cart.
You will get the shipping for free!
Fibre sanding disc
HERMAN FX-10
For stainless and alloy steels
Start over
Choose variant:
Diameter (mm)
Grain size
Balenie (ks)
For sanding surfaces, edges and corners with aggressive and very aggressive pressure on the worked material
Suitable equipment
Angle grinders
Angle grinders
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Angle Grinder HERMAN WX-12505 BL 125 mm | 1300 W | 196,00 € |
|
196,00 € | |
|
Angle Grinder HERMAN WX-12506 BL 125 mm | 1300 W | 238,00 € |
|
238,00 € | |
|
Angle Grinder HERMAN WX-12507 125 mm | 1500 W | 176,00 € |
|
176,00 € | |
|
Angle Grinder HERMAN WX-12508 125 mm | 1500 W | 207,00 € |
|
207,00 € | |
|
|
Angle Grinder HERMAN WX-12507 125 mm | 1500 W | 124,00 € |
|
124,00 € | |
|
|
Angle Grinder HERMAN WX-12508 125 mm | 1500 W | 134,00 € |
|
134,00 € | |
|
Angle Grinder HERMAN WX-12501 125 mm | 1000 W | 82,00 € |
|
82,00 € | |
|
|
Angle Grinder HERMAN WX-12501 125 mm | 1000 W | 61,00 € |
|
61,00 € | |
|
Angle Grinder HERMAN WX-18001 180 mm | 2000 W | 155,00 € |
|
155,00 € | |
|
Cordless angle grinder HERMAN AXAG-1800 | 125 mm 18,0 V | 5Ah | Complete | 342,00 € |
|
342,00 € | |
|
Cordless angle grinder HERMAN AXAG-1800 | 125 mm 18,0 V | Baretool | 165,00 € |
|
165,00 € |
Designation
- For sanding stainless, high-alloy and heat-resistant steels
- For a wide sanding range with conventional angle grinders due to the possibility of combining the type of backing plate and the grit of the sanding disc
- For machining surfaces, edges and corners with aggressive and very aggressive worked material pressure, cleaning welds and weld seams as well as for a wide range of applications under industrial conditions
- Depending on the selected grit size: from aggressive sanding to fine cleaning
- Depending on the type of backing plate: from surface sanding to sanding of edges, corners and hard-to-reach areas
Description
Primary raw material - layer of abrasive ceramic grains (100%) bonded with synthetic resin to a 0.85mm thick vulcanised fibre backing:
very good removal especially when machining stainless steel, alloy steels, etc.
Necessity of using a backing plate:
the properties of the backing plate (hardness, elasticity) are decisive for the type of work to be carried out and the design of the plate is a key factor for safety at work
Grain size standard in the range P24 to 80 according to FEPA (850 to 200 µm):
allows the selection of the appropriate tool from coarse sanding to finer cleaning
| Diameter (mm) | Grain size | Quantity in package (pcs) | |
ID: 15070301
|
125 | P24 | 25 |
ID: 15070301
|
125 | P24 | 100 |
ID: 15070302
|
125 | P36 | 25 |
ID: 15070302
|
125 | P36 | 100 |
ID: 15070303
|
125 | P60 | 25 |
ID: 15070303
|
125 | P60 | 100 |
ID: 15070304
|
125 | P80 | 25 |
ID: 15070304
|
125 | P80 | 100 |
ID: 15070305
|
180 | P24 | 25 |
ID: 15070305
|
180 | P24 | 100 |
ID: 15070306
|
180 | P36 | 25 |
ID: 15070306
|
180 | P36 | 100 |
ID: 15070307
|
180 | P60 | 25 |
ID: 15070307
|
180 | P60 | 100 |
ID: 15070308
|
180 | P80 | 25 |
ID: 15070308
|
180 | P80 | 100 |
Questions and answers
Karol Bryndzák
technical consultant
Marek Baláž
manažér úseku opráv
István –
Hosszú élettartam, szépen csiszol.
Long life, polishes beautifully.
P120 szemcseméret hiányzik
Luboš Pícha –
Brousí rychle
Grinds quickly
Translate text Show original