InternationalThere are no items in your cart.
You will get the shipping for free!
Bit Holder
HERMAN SB-80
¼" hex shank
Start over
Choose variant:
Length (mm)
Balenie (ks)
With a strong neodymium permanent magnet. Holds not only the bit but also smaller screws firmly, 2 variants
Suitable equipment
Cordless drill/drivers
Cordless drill/drivers
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Cordless drill/driver HERMAN AXSP-1440 14,4 V | with impact | Complete | 274,00 € |
|
274,00 € | |
|
Cordless drill/driver HERMAN AXSP-1800 18,0 V | with impact | Complete | 279,00 € |
|
279,00 € | |
|
Cordless drill/driver HERMAN AXSP-1801 18,0 V | 5Ah | Complete | 329,00 € |
|
329,00 € | |
|
Cordless drill/driver HERMAN AXSP-1801 18,0 V | with impact | Baretool | 149,00 € |
|
149,00 € | |
|
Cordless drill/driver HERMAN AXS-1802 18,0 V | with impact | Complete | 194,00 € |
|
194,00 € |
Drill drivers and impact wrenches
Drill drivers and impact wrenches
| Product | Price (€/1piece) | Quantity in package (pcs) | Total (€) | Add to cart | |
|
Cordless drill/driver HERMAN AXSP-1441 | 14,4 V with impact | Complete | 259,00 € |
|
259,00 € | |
|
Cordless drill/driver HERMAN AXS-1080 | 10,8 V Complete | 144,00 € |
|
144,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V 2Ah | Complete | 290,00 € |
|
290,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V 5Ah | Complete | 363,00 € |
|
363,00 € | |
|
Cordless drill/driver HERMAN AXSP-1803 | 18,0 V with impact | Baretool | 186,00 € |
|
186,00 € |
Designation
- For all applications under standard industrial conditions with hand tools, as well as for conventional impact and non-impact soft screwing with electric and cordless screwdrivers
Description
Equipped with a strong N35 neodymium permanent magnet:
securely and reliably holds the bit and helps when screwing in difficult to reach places - keeps smaller screws on the magnetized bit
Slim design:
for easy handling even in confined spaces. Diameter at the bit grip only 10mm
With ¼" hexagonal shank (form E 6.3 according to DIN ISO 1173):
suitable for clamping in three-jaw chucks and compatible with all standard ¼" bits (form C 6.3 or E 6.3 according to DIN ISO 1173)
| Length (mm) | Quantity in package (pcs) | |
ID: 17018001
|
60 | 1 |
ID: 17018002
|
150 | 1 |
Questions and answers
Karol Bryndzák
technical consultant
Marek Baláž
manažér úseku opráv
Ľuboš Huraj –
držiak so silnym magnetom
holder with strong magnet
kvlaitne spracovanie
cena
Vojtech –
Dobrý produkt
Good product
Translate text Show originalZsolt Kozma –
Elégedettek voltak a vevők, nem volt rossz visszajelzés
Customers were satisfied, there was no bad feedback
Translate text Show originalstaako –
Kvalitny produkt.
Quality product.
Translate text Show originalGabriel Křížek –
dobrý pomocník
good helper
Translate text Show originalJózsef Tomcsa –
Nagyon jó minőség, csak ajánlani tudom
Very good quality, I can only recommend it
Translate text Show originalVince Péter Bukta –
megfelelő
appropriate
Translate text Show originalJOZEF Gallovič –
kvalita
quality
cena
žiadne
Tünde Dánné Lukács –
Nagyon jó a befogatórésze
The clamping part is very good.
Translate text Show originalJános Kardos –
Jól illeszkedik tokba!
Fits well in the case!
Erősnek bizonyúlt!
Nem észlelek!
Péter Rácz –
Nagyon szeretik a kivitelezők! Jó termék!
Contractors love it! Good product!
Translate text Show originalMartin Dostál –
Dobrý produkt
Good product
Translate text Show original