Demolition hammer
HERMAN MXA-1050 | SDS-max
1050 W

Hammer switch with locking in the on position:
if needed, it is not necessary to hold the index finger of the hand on the switch during work

Anti-vibration system of the rear handle with a rubberized grip surface:
It significantly reduces the values of vibrations transmitted from the hammer to the hands

Sturdy, ergonomic side handle with a rubberized surface for attachment, removable without tools, with the possibility of attachment in two places, adjustable in the range 0-360°, in addition, with adjustable inclination:
the possibility of adjusting the handle in a wide range for comfortable work

The possibility of setting the chisel in 12 positions:
It increases work productivity by appropriately setting the position of flat, bladed and channel chisels

Light alloy gearbox reduces the weight of the hammer

Dust-tight clamping:
a special flexible seal reduces the permeability of dust to the quick-clamping mechanism and thus extends its service life

Self-disconnecting carbon brushes:
protecting the rotor commutator from damage at the end of the life of the carbon brushes

Gearbox made of light alloy:
the material used contains additives that increase resistance to wear

Specially shaped air inlets:
They increase the efficiency of engine cooling

• 1x Chopping hammer
• 1x Additional handle
• 1x Briefcase
• 1x Lithium plastic grease MT-21
• 1x Instructions for use