Quick Change Cleaning Disc
MKY-10/QC Dragon Red
Abrasive: STRIP-IT Aggressive

Primary raw material STRIP-IT Red:
a three-dimensional mesh structure made of durable nylon fibers, impregnated with a resin and abrasive grain with a special surface treatment for a very aggressive effect

HERMAN MP-90S series backing plate must be used according to the selected diameter:
45mm backing plate for a 50mm cleaning disc / 70mm backing plate for a 75mm cleaning disc

Stability of the structure of the primary raw material:
the structure of the tool does not change under the influence of grinding, thus allowing repeated use with undiminished performance

Elasticity as a key feature:
enables cleaning even highly uneven surfaces

The contact surface is only minimally contaminated with dirt:
the grinding dust from the pores is easily released during grinding due to centrifugal force

The porous structure dissipates heat effectively:
ambient swirling air easily penetrates the pores and contributes significantly to cooling the tool

Robust design:
grinding wheel thickness up to 13mm

Very aggressive cleaning and layer removal:
coarse abrasive grain with special surface treatment intensively and effectively removes dirt and also penetrates the surface of the processed material

Universal use:
the range depends largely on the peripheral speed (recommended range: 20-30m/s) and the grinding pressure

Warning:
when machining stainless steel, do not use the same tool for other materials

Warning:
when working, do not exceed the maximum speed indicated on the product.

Suitable for tools: