Circular saw blade
HERMAN CW-50 Lamina
Laminate flooring from 6 mm

Tool fitted with 40 teeth TCT (Tungsten Carbide Type) type OKE 405, cobalt impurity min. 8%:
very good durability when cutting laminate flooring and wood composites

Tooth thickness of only 1.6 mm, with ATB (Alternate Top Bevel):
good penetration into the cut material and a clean cut thanks to the high number of teeth

The thickness of the body of the disc is only 1 mm:
the carbide teeth overhang the edge of the body by approx. 0.3 mm and thus minimizes the possibility of the body rubbing against the cut material during straight cuts

Body of the disc made of carbon alloy steel with a surface layer modified by electrophoresis:
the smooth surface contributes to reducing friction even when the tool is deflected to the side during cutting.

Positive tooth face angle 15˚:
optimum angle for cutting wood and wood composites

Dynamic imbalance max. 0.5 grams:
vibration of the tool during cutting is practically excluded

Protection of teeth from damage:
the edges of the teeth are protected from damage with a silicone ring in the package

Recommendation:
for an absolutely clean cut, always cut the laminate flooring piece from the underside