Cordless circular saw
HERMAN AXCS 1800
18,0 V | Baretool

Ergonomically shaped main handle and additional front handle - both with non-slip rubberized surface:
comfortable, pleasant grip

Ergonomic position of the main and safety switch:
comfortable control with the middle finger and index finger, or thumb and index finger

Setting the depth of the cut with a scale:
quick selection of the desired cut in the range of 0-57 mm with locking in the set position

Setting the cutting angle with a scale:
quick selection of the desired cutting angle from 0-50° with locking in the set position

Parallel support:
for precise guidance of the circular saw in the cut, adjustable with locking in the desired position

External extraction:
the possibility of connecting to an external vacuum cleaner with a Ø 40 mm end or via a universal adapter

Spindle locking:
It blocks the rotation of the shaft when changing the tool and thus facilitates its replacement

LED indicator of the current state of the battery inserted in the tool:
It allows you to continuously check its charge level

Integrated LED for lighting part of the work surface:
more comfortable and precise work

Flexible battery system for the use of one battery:
all 18,0 V HERMAN batteries, regardless of capacity, are compatible with each other

Protective cover with automatic position adjustment regardless of the depth of cut:
minimization of the risk of injury to the operator during work

Separately located safety switch:
It prevents accidental switching on of the circular saw

Electronic speed brake:
It immediately stops the rotation of the tool when the switch is turned off. This minimizes the risk of injury to the operator due to the rotation of the tool due to inertia

Right and left switch closure in intermediate position:
protecting the operator from accidentally switching on the circular saw

Overload protection:
intelligent electronics save the motor

Gearbox made of light alloy:
the material used contains additives that increase resistance to wear

Self-disconnecting carbon brushes:
protecting the rotor commutator from damage at the end of the life of the carbon brushes

Specially shaped air inlets:
increasing the efficiency of engine cooling

Effective anti-dust system:
reducing the penetration of dust during the intake of cooling air