ACTION! Impact driver / wrench
HERMAN AXI-1801 | 18,0 V
Complete | Cordless fan Cleaner FREE

Impact driver / wrench HERMAN AXI-1801:

The possibility of choosing one of four working modes:
two modes of setting the range of revolutions and blows, a drilling mode and a fast interval screwdriving mode for precisely driving screws into the underlying material

Automatic activation of shock mode:
if the load during screwing is higher than the set spring preload, automatic activation of shock mode will occur

Quick-release system with two tool clamping options:
1/2" external square and 1/4" internal hexagon for screw bits

Electronic speed brake:
when the switch is turned off, it immediately stops the rotation of the tool and thus saves time when changing it

Right- and left-hand switching:
the technical solution ensures the same torque in both directions of rotation. The result is the same force when tightening and loosening screws

Continuous speed regulator integrated in the switch:
a useful function especially in the initial stages of screwing

Continuous speed regulator integrated in the switch:
precise guidance of the drill when drilling holes

Integrated LED for lighting part of the work surface:
more comfortable and precise work

Optimized, ergonomically shaped handle with non-slip rubberized surface:
comfortable, pleasant grip

Flexible battery system for the use of one battery:
all 18,0 V HERMAN batteries, regardless of capacity, are compatible with each other

Light alloy gearbox:
reducing the weight of the impact driver / wrench

Metal clip:
for fastening the screwdriver to the belt. Demountable if necessary

Cordless fan HERMAN AXL-30 | 18,0 V:

Choice of power supply:
DC 18 V batteries or AC 220-240 V via adapter (adapter included)

Three selectable idle speeds:
allow you to set the optimum amount of airflow

Joint for vertical adjustment of the fan cage inclination:
possibility to select the desired airflow angle from -45° to +180° in 17 positions of approx. 14° for optimum airflow direction

Two USB output ports:
usable for on-site mobile phone charging (2x 5V/1A)

Compact design:
integrated handle and well-spaced centre of gravity for comfortable carrying

Flexibility in use:
by placing on a horizontal base or by hanging thanks to two extendable hooks located in the base

Wall mounting option:
two fixed fixing points in the base for hanging on a vertical wall

Low power consumption:
5 hours of continuous airflow 18V/5Ah battery at full power

Robust construction:
strong and durable frame minimizes damage from potential impact in harsh working conditions

Quiet engine operation:
when switched on, only the sound of airflow can be heard even at the highest idling speed

Flexible battery system for single battery use:
all HERMAN 18 V batteries, regardless of capacity, are compatible with each other

Impact driver / wrench HERMAN AXI-1801:

Overload protection:
intelligent electronics save the motor

Gearbox made of light alloy:
the material used contains additives that increase resistance to wear

Specially shaped air inlets:
increasing the efficiency of engine cooling

Electronic speed level switch:
Quickly set the required speed level with the electronic switch according to the type of work

• Impact driver / wrench HERMAN AXI-1801:
• 1x Impact driver / wrench
• 2x Battery 18,0 V / 5,0 Ah
• 1x Fast charger
• 1x Metal clip
• 1x Briefcase
• 1x Instructions for use
• Cordless fan HERMAN AXL-30 | 18,0 V:
• AC adapter
• Instructions for use