Cordless combi-hammer
HERMAN AXHD-1800
SDS+ | 18,0 V | 2Ah | Complete

3+1 position switch of operating modes:
drilling with hammer, drilling without hammer, hammer without turning the tool for chopping work and mode of setting the position of the chisel

Optimized, ergonomically shaped rear handle with non-slip rubberized surface:
comfortable, pleasant grip

Electronic speed brake:
when the switch is turned off, it immediately stops the rotation of the tool and thus saves time when changing it

Ergonomic side handle with a rubberized grip surface, removable without tools, adjustable in the range 0-360°:
It allows you to grip the hammer safely while working and to set a comfortable handle position

Variable speed with a regulator built into the switch:
enabling precise guidance of the drill when drilling holes

Right- and left-hand switching:
the technical solution ensures the same torque in both directions of rotation, useful especially when releasing drill bits from deep drilled holes and for some screwdriving applications with the appropriate adapter (not included).

Chisel adjustment in 10 positions:
increases work productivity by appropriately setting the position of flat, bladed and channel chisels

LED indicator of the current state of the battery inserted in the tool:
allows you to continuously check its charge level

Integrated LED for lighting part of the work surface:
more comfortable and precise work

Continuously adjustable depth stop in the range from 0-180 mm:
for serial drilling of holes of the same depth

Overload protection:
intelligent electronics save the motor

Dust-proof clamping of the tool:
a special flexible seal reduces the permeability of dust into the tool clamping head and thus extends the life of the quick-clamping mechanism

Mechanical clutch:
when the drill is suddenly pushed, the clutch disconnects the engine from the gearbox and protects the engine from overload

Gearbox made of light alloy:
the material used contains additives that increase resistance to wear

Specially shaped air inlets:
increasing the efficiency of engine cooling

Effective anti-dust system:
reducing the penetration of dust during the intake of cooling air